On this page
Quick Start and Operation
Gantry Shipping Position Instructions
-
Check shipping position
-
New machines are shipped with the gantry secured in the forward-most position.
-
In this state, Input 11 (Front Limit) and the E-Stop will both show as active.
-
-
Cut the shipping straps
-
Carefully cut the straps holding the gantry in place.
-
-
Move the gantry
-
From the center of the gantry, gently push it backward until the front limit switch is released.
-
-
Confirm disengagement
-
Open the diagnostics page.
-
Verify that Input 11 (Front Limit) are no longer active, E-Stop will now clear/reset.
-
